AP Planer Planer performance is greatly improved with the centre pivot design, which puts the force of the skid steer directly over the cutting drum. This eliminates stress on the planer frame and the "instability and bouncing" experienced with the rear pivot or top pivot products currently on the market. This feature greatly increases productivity and stability in your most difficult planning operations such as dense packed asphalt or concrete.
	Cassette Planer The CAS 400 and 450 are available to fit most back hoe loaders, a typical high flow circuit is required.
	APX Planer The patented power adjust depth control utilises the bucket function of your skid steer to adjust the depth of cut to the planer. This simple to use method allows the operator to keep his hands on the controls at all times and give precise control of the planning operation.
	Water Kit The Universal Water Kit is a roof mounted watering system designed to extend pick life and assist the operator in meeting environmental needs.
	Mini & Backhoe Stump Cutter The BSC480 has been developed to optimise the stump cutting ability of your 2.5 - 8.0 ton Mini Digger or Backhoe Loader (Patented Offset Design).
	Skid Steer Stump Cutter The patented offset design of the Universal Bingham stump cutters increase productivity by providing maximum visibility to the stump, allowing better control of the cutting head. The offset design also directs the chips and dust to the side and away from the operator, improving operator comfort.
	Compaction Plates By utilising dual counterweight technology, the Coneqtec compaction line provides true vertical compaction force while eliminating the harmful horizontal vibration. This allows higher compaction forces to be used on smaller units without increasing wear and tear on the rubber mounts or on the loader arms and skid steer unit.
	SSG Slot Cutter The patented roll-in depth control allows the operator to easily change the depth of cut without removing his hands from the controls. The operator controls the depth utilising the skid steer's existing bucket function.
	Surface Preparation The SP (surface preparation) unit is available with two drum types. Type 1 - fine finish pick drum and Type 2 - flail drum.
	Rock Saw The Universal Bingham Rock Saw is designed to cut through asphalt, concrete, frozen ground and even rebar when fitted to a high flow skid steer.
	Bucket Brush The Universal Bucket Brush is available in various widths, using direct drive onto the shaft, thus reducing the possibility of power loss. The unique combination of height adjustment with a lock down lid facility improves sweeping stability and bounce. All units are available in quick change, poly, wire or combination bristles, which are easily changed for maintenance.